Post layout and span check
Confirm post spacing (typically 36–48 in.), check that intermediate posts are required by code for longer runs, and note any corners that need special tensioning hardware.
Port Moody cable railings keep views of Burrard Inlet open on decks, balconies, and exterior stairs across Heritage Mountain and Moody Centre. The wetter inlet climate and moderate marine influence mean hardware selection matters — cable and fittings rated for the exposure deliver better long-term performance than standard inland hardware.
Cable railing keeps sightlines open while staying practical for many homes and commercial spaces. Post spacing, tensioning, corner details, and top rail selection determine how clean the finished system feels.
Port Moody projects often pair view-focused railings with modern residential metalwork in wet, inlet-adjacent conditions.
| Scope | Typical range | Notes |
|---|---|---|
| Standard cable railing | $150-$250/linear ft | Steel posts and stainless cable |
| Stair cable railing | $225-$375/linear ft | Angled fittings and layout complexity |
| Coastal stainless upgrade | $275-$450/linear ft | For exposed waterfront conditions |
Confirm post spacing (typically 36–48 in.), check that intermediate posts are required by code for longer runs, and note any corners that need special tensioning hardware.
Select cable diameter, fitting type (swaged or push-lock), and post material (powder-coated steel vs. stainless) based on site exposure and maintenance expectations.
Fabricate steel posts, top rail, and any stair-mount brackets in the shop; powder coat or prime the steel before delivery.
Specify 316 stainless for exposed coastal sites; confirm cable run lengths so each run has enough adjustment range at both ends.
Set posts, run cables, tension to specification, confirm guard height compliance, and check cable spacing does not exceed code limits at the steepest point.
1.8 kPa reference value for early planning. Final engineering confirms project-specific assumptions.
moderate exposure. Finish and hardware choices should follow the exact site conditions.
Waterfront, guard, and structural attachment details can add review requirements.
Cable Railings pricing depends on dimensions, railing type, finish, access, and engineering. Current planning ranges on this page run from $150-$250/linear ft depending on scope.
Most cable railings projects run 6–10 weeks from a confirmed order: 1–2 weeks for shop drawings and engineer review, 3–5 weeks in fabrication, and 1–2 weeks for finishing and installation scheduling. Port Moody site access and permit timing can shift that window, so starting the quote early gives the most flexibility.
Floor-to-floor height or linear footage, site photos, any existing drawings, finish preference, and whether a permit has been applied for. For Port Moody's moderate coastal exposure, confirming the hardware specification early avoids changes after shop drawings are approved.
Send drawings, photos, or a rough scope and we will help define the practical next step.