Burnaby home staircase work runs from custom houses in Capitol Hill and Burnaby Heights to townhomes and infill near Metrotown and Brentwood. With the shop in Burnaby, site visits, measuring, and install scheduling are the most direct of any city we serve.
A residential staircase is usually the most-used custom feature in a home, so it has to be comfortable, safe, and built to last as well as look right. We design the stair around how the household actually lives — the daily traffic, the sightlines, the structure that's already there — then fabricate and install it to BC Building Code Part 9.
Burnaby mixes custom homes, strata towers, institutional projects, and commercial spaces, which makes it a strong fit for both residential stairs and repeatable railing packages.
| Scope | Typical range | Notes |
|---|---|---|
| Straight-run or secondary stair | $12,000-$24,000 | Basement, loft, or secondary access; compact straight runs and spirals |
| Main feature stair (mono stringer or floating) | $18,000-$34,000 | Open-tread modern main-floor stair with steel or wood treads |
| Architectural feature stair | $38,000-$65,000+ | Complex geometry, premium treads, integrated glass or cable guards |
Walk through how the stair will be used, the look the home is after, and which stair type fits — mono stringer, floating open-riser, straight-run, or a feature stair. We match the structure to the space rather than starting from a fixed product.
Measure the floor-to-floor height and the opening, then check that the existing or planned framing can carry the stair and the guard. Older Metro Vancouver homes often need a framing review before the steel is sized.
Prepare shop drawings showing the stringer, tread brackets, guard anchorage, and floor connections, coordinated for BC Building Code Part 9 residential requirements. Engineer involvement is arranged when the design calls for it.
Cut and weld the stair in the shop, fit-check before finishing, then apply powder coat, clear coat, or primer. Tread material — white oak, walnut, steel, or stone — is confirmed before the brackets are set.
The stair is delivered in manageable sections where access requires it, set and connected on-site, then treads and guard are fitted and aligned. We confirm guard height and code compliance before sign-off.
1.6 kPa reference value for early planning. Final engineering confirms project-specific assumptions.
none exposure. Finish and hardware choices should follow the exact site conditions.
New stairs, altered guards, and structural steel attachments generally need permit or engineer review.
Burnaby is the closest city to our shop, typically a 0 to 20 minute drive, so a site measure can usually be arranged on short notice. Getting the floor-to-floor height and the opening confirmed in person early keeps the shop drawings accurate and the install on schedule.
Residential Staircase pricing depends on dimensions, railing type, finish, access, and engineering. Current planning ranges on this page run from $12,000-$24,000 depending on scope.
Most residential staircase projects run 6–10 weeks from a confirmed order: 1–2 weeks for shop drawings and engineer review, 3–5 weeks in fabrication, and 1–2 weeks for finishing and installation scheduling. Burnaby site access and permit timing can shift that window, so starting the quote early gives the most flexibility.
Floor-to-floor height or linear footage, site photos, any existing drawings, finish preference, and whether a permit has been applied for. For Burnaby projects, confirming the finish and connection details early avoids changes after shop drawings are approved.
Send drawings, photos, or a rough scope and we will help define the practical next step.