Diameter and floor height confirmation
Measure available floor area, confirm headroom clearance, and determine the right diameter and tread geometry for the actual use — code compliance and practical comfort both matter.
Port Moody spiral stairs serve secondary access in Heritage Mountain detached suites, Moody Centre rooftop decks, and inlet-view properties where the grade change is real but the footprint for a standard stair is not. The wetter inlet climate means exterior spiral stairs need finishes that handle the moisture load — powder coat alone on a fully exposed stair is not sufficient.
A spiral staircase solves space constraints but needs careful attention to diameter, tread geometry, guard height, and how people will actually use the stair.
Port Moody projects often pair view-focused railings with modern residential metalwork in wet, inlet-adjacent conditions.
| Scope | Typical range | Notes |
|---|---|---|
| Interior spiral stair | $12,000-$24,000 | Diameter and guard detail drive cost |
| Exterior galvanized spiral | $16,000-$32,000 | Weather-ready finish and site access |
| Custom architectural spiral | $28,000-$55,000+ | Feature-grade detailing |
Measure available floor area, confirm headroom clearance, and determine the right diameter and tread geometry for the actual use — code compliance and practical comfort both matter.
Calculate tread angle, rise, and run; design the guard and handrail to meet the BC Building Code guard height and opening requirements for the specific space.
Fabricate the steel centre column, tread plates, and balustrade as a unit in the shop; trial-fit before finish is applied.
Interior spirals typically take powder coat or clear coat; exterior applications need galvanizing or marine-grade powder coat rated for the exposure conditions.
Spiral stairs are typically installed in a single operation — column, treads, and guard arrive together; lower and upper connection points are confirmed before the unit is set.
1.8 kPa reference value for early planning. Final engineering confirms project-specific assumptions.
moderate exposure. Finish and hardware choices should follow the exact site conditions.
Waterfront, guard, and structural attachment details can add review requirements.
Spiral Staircase pricing depends on dimensions, railing type, finish, access, and engineering. Current planning ranges on this page run from $12,000-$24,000 depending on scope.
Most spiral staircase projects run 6–10 weeks from a confirmed order: 1–2 weeks for shop drawings and engineer review, 3–5 weeks in fabrication, and 1–2 weeks for finishing and installation scheduling. Port Moody site access and permit timing can shift that window, so starting the quote early gives the most flexibility.
Floor-to-floor height or linear footage, site photos, any existing drawings, finish preference, and whether a permit has been applied for. For Port Moody's moderate coastal exposure, confirming the hardware specification early avoids changes after shop drawings are approved.
Send drawings, photos, or a rough scope and we will help define the practical next step.