Site measure and slope check
Measure the driveway opening width, assess the slope grade at the gate line, and confirm post locations and setbacks — slope determines whether swing or slide is practical.
North Shore
Driveway Gates in West Vancouver
West Vancouver driveway gates often serve estate properties in the British Properties and Chartwell where security, automation, and visual presence matter as much as the steel itself.
A good gate looks intentional and operates cleanly. Frame stiffness, hinge posts, slope, automation planning, and finish selection all matter before the steel is cut.
What matters in West Vancouver
West Vancouver work tends to be design-led, with feature stairs, glass guards, gates, and canopies built for high-exposure view properties.
- Steep driveways require careful hinge post placement and automation motor sizing.
- Gate designs should coordinate with existing fencing, landscaping, and architectural style.
Common configurations
- Swing and slide driveway gates
- Pedestrian gates matched to fencing
- Modern slat, picket, or panel designs
- Automation-ready steel frames
Budget ranges
| Scope | Typical range | Notes |
|---|---|---|
| Manual pedestrian or small driveway gate | $4,500-$12,000 | Simple steel design |
| Custom double swing gate | $12,000-$30,000 | Posts, hinges, and finish included |
| Automation-ready gate package | $25,000-$55,000+ | Automation by specialist coordination |
Process
Automation planning
If automation is required, coordinate the motor specification with the gate fabricator before steel sizing is confirmed — the motor's duty cycle and torque rating affect the frame weight target.
Gate frame fabrication
Fabricate the gate frame with appropriate tube sizing for the span, weld infill panels or slats, and fit-check the gate against the post template in the shop.
Hinge post setting
Set hinge posts in concrete with correct offset for the gate swing arc; posts must be plumb and in-line before the gate is hung.
Gate hang, finish, and automation install
Hang and adjust the gate, apply powder coat or primer in the shop before delivery, and coordinate automation motor installation with the specialist.
Local conditions
1.8 kPa reference value for early planning. Final engineering confirms project-specific assumptions.
high exposure. Finish and hardware choices should follow the exact site conditions.
Permit timelines can be longer on complex, hillside, waterfront, or view-sensitive properties.
FAQ
Planning questions for West Vancouver
How much do driveway gatess cost in West Vancouver?
Driveway Gates pricing depends on dimensions, railing type, finish, access, and engineering. Current planning ranges on this page run from $4,500-$12,000 depending on scope.
How long does a driveway gates project take from quote to installation in West Vancouver?
Most driveway gates projects run 6–10 weeks from a confirmed order: 1–2 weeks for shop drawings and engineer review, 3–5 weeks in fabrication, and 1–2 weeks for finishing and installation scheduling. West Vancouver site access and permit timing can shift that window, so starting the quote early gives the most flexibility.
What information helps get an accurate West Vancouver quote?
Floor-to-floor height or linear footage, site photos, any existing drawings, finish preference, and whether a permit has been applied for. For West Vancouver's high coastal exposure, confirming the hardware specification early avoids changes after shop drawings are approved.
Start a project
Plan a driveway gates project in West Vancouver
Send drawings, photos, or a rough scope and we will help define the practical next step.